Kosnic 5W Universal Emergency Module for LED Luminaires - CEW03LIL/S

The Universal Emergency Module (UEM) with Automatic Self-Test (AST) is suitable for class III luminaires with integrated LEDs and separate LED drivers. The DC voltage output is adjusted within the UEM’s limits to the level required to operate the luminaire load and then the current is limited to ensure an operation time of three hours. This gives a typical power output of 3W but will depend on the characteristics of the luminaire. The UEM can be installed within a luminaire or within the ceiling void. In the event of a power cut the replaceable internal lithium-ion battery will supply the luminaire through a connection that must be made between the LED driver output and LED luminaire input.

For class III luminaires with integrated LEDs and separate LED drivers

Automatic Self-Test (AST) technology conforming to EN 62034

For maintained or non-maintained emergency lighting systems

Conforms to EN 61347-1 and EN 61347-2-7

Bi-coloured status LED

Supplied with plug-in Three-Way Connector with DC jacks that can also be wired via internal terminals

Suitable for use in luminaires for high-risk task area lighting

Voltage change-over threshold according to EN 60598-2-22

3 hours rated duration

Internal Li-Ion battery for improved lifespan allowing frequent partial discharge without capacity reduction

Over-charge, over-current, short-circuit and deep discharge protection for battery

Colour Finish: Black

Input Current (mA): 35

Input Voltage: 220-240Vac 50-60Hz

IP Rating: IP20

Class Protection: Class II

Input to Output Protection: Double Insulation

Output Wattage (W): 2.1-3.6 (typical 3)

Output Voltage (Vdc): 20-58

Output Current (mA): 50-110

Open Circuit Voltage (Vdc): 60

Maximum Working Voltage (Vdc): 58

Length (mm): 230

Width (mm): 46

Depth (mm): 26

Maximum Case Temperature (°C): 75

Ambient Temperature (°C): -10 to 45

Emergency Conversion Time (seconds): 1

Emergency Operating Time (hours): > 3

Test Function: Automatic and Manual

Battery Code: KBAT2600

Battery Voltage (V): 7.4

Battery Capacity (mAh): 2600

Battery Type: Li-Ion

Battery Charge Voltage (Vdc): 8.5

Battery Charge Current (mA): 30-210

Battery Discharge Voltage (Vdc): 6.0-8.4

Battery Discharge Current (mA): 600-700

Battery Life (years): 4

Charging Time (hrs): 12

Barcode: 5060063425375